TMMI is Proud to Announce the Following New Products

TMMI Sample Product Graphic

Turck BL Compact I/O Family Collects Digital and Analog Signals at the Source
This revolutionary modular I/O solution can collect a variety of signals in a single, rugged node on a network. This eliminates the need to route individual signals through a control cabinet, and and instead obtains analog, digital, thermocouple, RTD, serial, RFID, or a mixture of all these types in a compact, machine-mountable device that is networkable with DeviceNet, CANopen, and PROFIBUS. Other features include:

• Flexible and configurable I/O station in a rugged housing
• Quick disconnect analog
• LED display of status and diagnostics
• Nontraditional solutions: eight digital inputs with 8 M8 connectors that don't require splitters

 

TMMI Sample Product GraphicTMMI Sample Product Graphic

Turck PT4500 & PT4510 Submersible Pressure Transmitters
• Submersible pressure transmitters
• UL/cUL 913 (CSA 157) Class 1 Div 1 Group C, D when instaled with an approved barrier per control drawing IS1.904
• Indoor and outdoor applications
• Available in ranges from 0-2.5 PSIG up to 0-100 PSIG
• Compatible with a wide range off liquids
• EMI/RFI Protection
• High Strength Stainless Steel Construction

More Information Click Here

TMMI Sample Product Graphic

 

 

Banner Introduces QS30H2O Water Sensor
The QS30H2O Water Sensor is a high-power, infrared sensor that uses a 1450 nm sensing beam to burn through many containers allowing for liquid detection

 

 

 

 

 

TMMI Sample Product Graphic

Banner SC22-3 Safety Controller
• Easy-to-use Controller with fully configurable inputs and outputs
• ISO 13849-1 Category 2, 3, or 4 and OSHA/ANSI Control Reliability Input device hookup.
• Manages several safety related functions
• 22 Inputs for safety and non-safety input devices
• 3 dual channel Safety outputs (24V dc @ 0.75A) with selectable ON- and OFF-delay
• 10 Status outputs track input and output status, mute status, lockout, fault conditions and reset needed
• Simple configuration procedure using PC interface (PCI) or on-board controller interface (OBI) maps each input device to any of 3 safety outputs
• PCI software included with the SC22-3 Safety Controller; No licensing or additional charges.
• Configurations are password protected and confirmed before use, for assurance of safety integrity
• Configurations are transferable to multiple SC22-3 Controllers and can be e-mailed as attachments
• 24V dc operation
• Complies with Safety Integrity Level (SIL) 3 per IEC 62061 and IEC 61508, and Category 4 Performance Level “e” per ISO 13849-1.
• Live display and fault log provide “real-time” status information and historically track faults
• Wiring diagram, Ladder Logic diagram, and Configuration Summary can be printed or exported as .pdf or .dxf files

 

TMMI Sample Product Graphic

Banner SureCross Wireless Network
• RF communication system developed by Sensonix with efficient power management
• Each device contains a bidirectional transceiver with full data transmission acknowledgement
• Built in LCD for local I/O status, device identification and link status
• Embedded Site Survey capability for on-site RF link quality testing
• FlexPower for true wireless operation
• Housing is rated IEC IP67 (NEMA 6)
• Systems also available in configured kits. Contact your Banner Regional Business Center for assistance.

TMMI Sample Product Graphic

 

 

Banner EZ-Light
• Compact, unobtrusive and inexpensive – choose from 4 housing styles: 18 mm barrel, T18, T30, or 50 mm dome
• Replaces cumbersome • IP67 water-tight enclosure for machine mounting
• Other colors available

 

 

TMMI Sample Product GraphicQuickSilver Controls, Inc. OEM Servo Motor Controller/Driver Board

For OEMs or those people who have to fit a powerful servo motor controller/driver into a small place, QuickSilver Controls offers its popular SilverDust servo controller/driver in a user mountable, board only option.  The “board only” SilverDust IG (QCI-D2-IG-01) is a combined controller/driver which includes serial communications, 7 I/O, and 32K user program space but measures only 3”x2.75” (76mm x 70mm).  The user is responsible for mounting the board and heat sinking the drivers allowing for a customizable package.

A single cable connects between the controller and motor/encoder keeping costs down and making installation easy.

The controller will drive QuickSilver’s NEMA 17 and 23 frame servo motors which range from 20 to 300 oz-in continuous torque (0.14 to 2.1 N-m) and come standard with 8000 count/rev encoders.

The SilverDust IG servo controller board with a 4 foot (1.2m) cable and 145 oz-in (1 N-m) motor costs only $795 (USD).

More Information Click HereTMMI Sample Product Graphic

 

QuickSilver Controls, Inc. 145 oz-in (1Nm) NEMA 23 Frame Servo Motor

QuickSilver Controls, Inc. expands its current line of servo motors with the QCI-A23K-3.   This NEMA 23 frame motor generates 145 oz-in (1.0Nm) continuous torque, 165 oz-in (1.1Nm) peak torque, and 58W peak mechanical power.  The 23K-3 comes standard with an 8000 count/rev encoder and is available in both IP50 and IP65 (wash down) packages.  When combined with QuickSilver’s line of easy to use servo controller/drivers, this motor creates a high torque servo control system for speeds up to 2000 RPM.  With QCI’s ability to handle inertial miss-matches of 100:1, this motor is ideal for driving large flywheel loads without additional gearing.  The 23K-3, like QCI’s other NEMA 17 and 23 frame servos, requires only a single cable for both encoder and motor signals.

The 23K-3 lists at $240 and has a system cost (including controller, cable and motor) starting at $795 (OEM 500 piece $511).  The 23K-3 is an economical solution for motion control applications including semiconductor, packaging, medical and food processing.

See the QuickSilver website for a detailed datasheet.

More Information Click Here

TMMI Sample Product Graphic

 

 

TURCK’s BL ident RFID system is the first modular RFID system with built-in I/O on the market. Plus, BL ident can be integrated into existing platforms, and supports PROFIBUS®-DP, DeviceNet™, Modbus-TCP, PROFINET and EtherNet/IP™. The simulator can help you design a system tailor-made to your specific application needs.

 

TMMI Sample Product Graphic

 

 

 

GE Durus Controllers

For value-based applications that have lower I/O needs, the Durus Controller is an all-in-one solution. This low-end controller brings you a design that will stand up to the rigors of hard use. It was built with the user in mind, with easy-to-use programming that will let you get up and running more quickly. Whether your application is outdoors or in an industrial environment, the Durus provides a strong and steady controller solution at an excellent value.

 

TMMI Sample Product Graphic

Red Lion 15” TFT Operator Interface Panel - G315C
Red Lion proudly announces the release of a new G3 series operator interface panel. The model G315C touchscreen panel features a large 15" TFT active matrix 32K color XVGA 1024 x 768 pixel LCD display and a ten button keypad for on-screen menus.
The G315C includes an additional RS485 port in addition to the G3 family’s standard compliment of three serial ports and an Ethernet port. The two RS232 and two RS485 ports allow the G315 to communicate to virtually any serial device. The built-in Ethernet port supports up to four protocols simultaneously, allowing an unprecedented level of connectivity.
As with all G3 panels, the G315C also includes a USB programming port, an expansion slot for the addition of fieldbuses, an integrated protocol converter, built-in web server, standard CompactFlash socket and IT-ready data logging.

 

 

 

GE IP Proficy Process Systems TMMI Sample Product Graphic
• Provide beter performance and efficiency results
• Closed Loop control from sensors to business systems
• Lower total cost of Ownership
• Scalable to meet your specific requirements
• Enables flexible cotnrol strategy developement
• Combines the best of DCS and PLC control
• Based on GE's latest hardware and software
• Integrates with Proficy Production Management software

 

 

 

 

 

TMMI Sample Product GraphicFortress Padlockable Dustcover (PLDC)
•Compatible with our new lockout scissor
hasps
• Can be mounted vertically or horizontally
More Information Click Here

 

 

 

TMMI Sample Product Graphic

Fortress Lockout & Lockout Scissor Hasps
• New LOH3 Lockout Hasp
• New LOS3 Lockout Scissor Hasp
post and stack lights
• Position conveniently near the operator
• Some models are programmable for multiple colors and flashing functions in the same unit
More Information Click Here

 

Fortress Dustcover Products
• New CLDC Standard Dustcover
• New PLDC Padlockable Dustcover
More Information Click Here